All vehicles have blind spots – areas around the vehicle that are concealed to the driver by bodywork, a trailer, the payload or some other obstruction. When maneuvering, these blind spots present a significant danger to anything or anyone in the vehicle’s path and inhibit the driver’s ability to operate the vehicle safely.
Backeye® 360 is an intelligent camera monitor system designed to assist low-speed maneuvering by providing the driver with a complete surround view of the vehicle in real time. High-mounted on the front, rear and sides, the calibrated cameras capture all of the surrounding area including the blind spots of the vehicle. The four live images are simultaneously sent to an electronic control unit (ECU) where they are instantly processed, combined, blended and stitched. The distortion from the wide-angle camera lens is also corrected before delivering a clear, single, smooth, real-time image onto the driver’s monitor.
SYSTEM INCLUDES:
- (1) 7-inch Digital LCD Monitor – Size 7.7″ W x 4.6″ H x 1″ D
- (1) Electronic Control Unit (ECU) – Size 6.9″ W x 4″ H x 1.2″ D
- (4) IP69K Cameras – Size (each) 1.4″ W x 2.4″ H x 1.8″ D
- (1) Video Output Cable (to connect to monitor)
- (1) Set-up/View-select Button
- (1) IR Receiver and Remote Control
- (1) ECU Power Harness
- (1) ECU Interface Harness
- (1) 10 m / 33′ Camera Cable
- (2) 15 m / 49′ Camera Cables
- (1) 20 m / 66′ Camera Cable
PRODUCT FEATURES:
- 360° Image
- 12-24VDC
- 19 Different View Modes (max 10 views per chosen configuration group) Including:
- Landscape or Portrait Configurations
- Front & Rear Crossing-traffic
- Left & Right Lane Changing Assist
- Customizable Vehicle Position
- 4 Pre-defined Configuration Groups
- Configure & Customize Set Up via Monitor and IR Remote Control
- Left, Right, Reverse & Speed Signal Triggers
- Configurable On-screen Parking Markers
- Manual View-select button
- 3 Video Outputs
- Ultra-wide Viewing Angle Cameras (H x V) 185° x 142°
- 1/3.6′ CMOS Sensor
- TV System: NTSC & PAL (via switch)
POWER:
- Power Consumption: 8 Watts
- Current: 0.65 Amps
DURABILITY & STANDARDS:
- Mechanical Vibration: 8.5G
- Mechanical Shock: 50G
- Operating Temperature: -30 to +75°C / -22 to +167°F
- IP30 ECU
- CE Marked
- EMC Approved: E
- FCC Approved
- IC Approved
- HALT tested
NOTES:
- Calibration Kit is Required for Installation
- Monitor and Camera Extension Cables Not Included
