GO POWER! 110W COMMERCIAL VEHICLE SOLAR KIT WITH 10A CHARGE CONTROLLER - PP807262

SKU: PP807262

 

Product Summary

PRODUCT FEATURES:

Pair your work or delivery truck with a 100W flexible solar kit to reduce idle time, extend battery life, and eliminate service calls due to dead batteries.

  • KIT INCLUDES:
    • 110W Flexible Solar Module
    • MMPT Charge Controller (10A)
    • 20' Harness
    • 30' Harness
    • Perimeter Edge Tape

110W FLEXIBLE SOLAR MODULE:

Solar Flex solar panels are designed to provide a powerful charging solution for batteries. Unlike other ‘thin' products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flat panel on the market. Built to withstand the harshest conditions.

  • FEATURES:
    • High-efficiency, back-contact solar cells
    • Penetrating or adhesive mounting option
    • Curves up to 30 degrees
    • Durable surface is less than 1/8 in (3 mm) thick
    • Industry standard quick-connect cables (MC4) work in series or in parallel
    • Marine grade material
    • Up to 82% lighter than other solar modules
    • Solar output power limited warranty of 5 years
  • SPECIFICATIONS:
    • Rated Power (Pm): 110W
    • Maximum Power Voltage (Vmp): 17.6V
    • Maximum Power Current (Imp): 6.31A
    • Open Circuit Voltage (Voc): 22.08V
    • Short Circuit Current (Isc): 6.60A
    • Power Coefficient: -0.38% / °C
    • Voltage Coefficient: -60.8mV / °C
    • Current Coefficient: 2.2mA / °C
    • Max Power Tolerance: +/- 5%
    • Cell Type: Monocrystalline
    • Solar Cell Efficiency: 21%
    • Series Fuse Rating: 10A
    • Maximum System Voltage: 600VDC
    • Weight: 2.9 lbs (1.35 kg)
    • Dimensions: 44.6 x 21.4 x 0.1 in (1134 x 544 x 3 mm)
    • Frame Type / Material: DNP topcoat, includes stainless steel grommets

MMPT CHARGE CONTROLLER (10A):
The industrial Maximum Power Point Tracking (MPPT) charge controller featuring a robust, fully-sealed (IP67) housing that resists vibration as well as dust-, insect- and water ingress. The MMPT ensures maximum performance and yield from all types of PV systems year-round and in any environment.

  • FEATURES:
    • IP67 rated waterproof protection with SC solar connections and Delphi battery connections
    • Up to 98% power conversion efficiency
    • Advanced multi-peak tracking technology, allowing for better charging in shaded areas)
    • Built-in over-temperature protection
    • Temperature compensation and automatic adjustment of charge and discharge parameters
    • Fully encapsulated design prevents damage from water, corrosion, insects and/or dust
    • Works with 12 or 24V battery systems (automatic battery voltage detection)
    • Supports lithium, sealed, vented, AGM, and flooded Lead Acid batteries
    • Converts excess array voltage into additional charging current
    • Temperature compensation and automatic adjustment of charge and discharge parameters
    • 5 year warranty
  • SPECIFICATIONS:
    • Nominal System Voltage: 12/24VDC Auto (N/A to Lithium)
    • Max Solar Array Current: 10A
    • Rated Charge Power: 130W/12V (260W/24V)
    • Max. PV Open Circuit Voltage:
      • 60V (at min operating temperature)
      • 46V (at 25°C temperature)
    • Operating Consumption: <13mA/12V (<11.5mA/24V)
    • Temp. Compensation: -3mV/°C /2V (N/A to Lithium)
    • Operating Temperature: 40 to 140 °F (-40 to 60°C)
    • Humidity: 99% N.C.
    • Dimensions (HxWxD): 4.90 X 4.36 X 1.18 in (124 X 111 X 30 mm)
    • Weight: 1.19 lbs (540 g)
    • Warranty: 5 years
    • Safety Features:
      • Battery Reverse Polarity
      • Solar Array Reverse Polarity
      • Over Temperature
      • Over Current
      • PV Short Circuit
      • Battery Short Circuit

*NOTE: Specifications may be subject to change. Product may not be exactly as shown. Specifications subject to local environmental conditions.

 
Print this Product