PRODUCT FEATURES:
Pair your work or delivery truck with a 100W flexible solar kit to reduce idle time, extend battery life, and eliminate service calls due to dead batteries.
- KIT INCLUDES:
- 110W Flexible Solar Module
- MMPT Charge Controller (10A)
- 20’ Harness
- 30’ Harness
- Perimeter Edge Tape
110W FLEXIBLE SOLAR MODULE:
Solar Flex solar panels are designed to provide a powerful charging solution for batteries. Unlike other ‘thin’ products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flat panel on the market. Built to withstand the harshest conditions.
- FEATURES:
- High-efficiency, back-contact solar cells
- Penetrating or adhesive mounting option
- Curves up to 30 degrees
- Durable surface is less than 1/8 in (3 mm) thick
- Industry standard quick-connect cables (MC4) work in series or in parallel
- Marine grade material
- Up to 82% lighter than other solar modules
- Solar output power limited warranty of 5 years
- SPECIFICATIONS:
- Rated Power (Pm): 110W
- Maximum Power Voltage (Vmp): 17.6V
- Maximum Power Current (Imp): 6.31A
- Open Circuit Voltage (Voc): 22.08V
- Short Circuit Current (Isc): 6.60A
- Power Coefficient: -0.38% / °C
- Voltage Coefficient: -60.8mV / °C
- Current Coefficient: 2.2mA / °C
- Max Power Tolerance: +/- 5%
- Cell Type: Monocrystalline
- Solar Cell Efficiency: 21%
- Series Fuse Rating: 10A
- Maximum System Voltage: 600VDC
- Weight: 2.9 lbs (1.35 kg)
- Dimensions: 44.6 x 21.4 x 0.1 in (1134 x 544 x 3 mm)
- Frame Type / Material: DNP topcoat, includes stainless steel grommets
MMPT CHARGE CONTROLLER (10A):
The industrial Maximum Power Point Tracking (MPPT) charge controller featuring a robust, fully-sealed (IP67) housing that resists vibration as well as dust-, insect- and water ingress. The MMPT ensures maximum performance and yield from all types of PV systems year-round and in any environment.
- FEATURES:
- IP67 rated waterproof protection with SC solar connections and Delphi battery connections
- Up to 98% power conversion efficiency
- Advanced multi-peak tracking technology, allowing for better charging in shaded areas)
- Built-in over-temperature protection
- Temperature compensation and automatic adjustment of charge and discharge parameters
- Fully encapsulated design prevents damage from water, corrosion, insects and/or dust
- Works with 12 or 24V battery systems (automatic battery voltage detection)
- Supports lithium, sealed, vented, AGM, and flooded Lead Acid batteries
- Converts excess array voltage into additional charging current
- 5 year warranty
- SPECIFICATIONS:
- Nominal System Voltage: 12/24VDC Auto (N/A to Lithium)
- Max Solar Array Current: 10A
- Rated Charge Power: 130W/12V (260W/24V)
- Max. PV Open Circuit Voltage:
- 60V (at min operating temperature)
- 46V (at 25°C temperature)
- Operating Consumption: <13mA/12V (<11.5mA/24V)
- Temp. Compensation: -3mV/°C /2V (N/A to Lithium)
- Operating Temperature: 40 to 140 °F (-40 to 60°C)
- Humidity: 99% N.C.
- Dimensions (HxWxD): 4.90 X 4.36 X 1.18 in (124 X 111 X 30 mm)
- Weight: 1.19 lbs (540 g)
- Warranty: 5 years
- Safety Features:
- Battery Reverse Polarity
- Solar Array Reverse Polarity
- Over Temperature
- Over Current
- PV Short Circuit
- Battery Short Circuit
*NOTE: Specifications may be subject to change. Product may not be exactly as shown. Specifications subject to local environmental conditions.
